View MMA02040D1603DB300_6954402.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

mma 0204 ht - professional vishay beyschlag document number: 28780 for technical questions, contact: melf@vishay.com www.vishay.com revision: 20-feb-12 95 professional high temperat ure mini-melf resistor this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mma 0204 professional high temperature melf resistors are the perfect choice for most fields of modern professional electronics where high operating temperatures, power rating, reliability and stability is of major concern. these improved properties are enabled by a modified resistive film material. the typical applications in the fields of automotive and industrial equipment reflect the outstanding level of proven reliability. features ? 175 c specified operating temperature ? aec-q200 qualified ? advanced thin film technology ? excellent stability, < 0.1 % ? matte sn termination on ni barrier layer ? compliant to rohs directive 2011/65/eu applications ? automotive ? industrial notes (1) the power dissipation on the resistor generates a temperatur e rise against the local ambi ent, depending on the heat flow suppor t of the printed-circuit board (thermal re sistance). the rated dissipation applies only if the per mitted film temperature is not exceede d. these resistors do not feature a limited lifetime when operated within the permissible limits. however, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the spec ific application, thereby es tablishing a functional lifeti me. (2) please refer to application information below. metric size din 0204 cecc rc 3715m technical specifications description mma 0204 ht cecc size rc 3715m resistance range 47 ? to 100 k ? ; 0 ? resistance tolerance 1 %; 0.5 % temperature coefficient 50 ppm/k; 25 ppm/k rated dissipation, p 70 (1) 0.5 w operating voltage, u max. ac/dc 200 v permissible film temperature, ? f max. (2) 175 c operating temperature range (2) - 55 c to 175 c insulation voltage 1 min; u ins 300 v continuous 75 v failure rate: fit observed ? 0.1 x 10 -9 /h
www.vishay.com for technical questions, contact: melf@vishay.com document number: 28780 96 revision: 20-feb-12 mma 0204 ht - professional vishay beyschlag professional high temperature mini-melf resistor this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 application information the power dissipation on the resistor gener ates a temperature rise against the loca l ambient, depending on the heat flow suppor t of the printed-circuit board (thermal resist ance). the rated dissipation applies only if the permitted film temperature is not exceeded. these resistors do not feature a limited li fetime when operated within the permissibl e limits. however, resistance value drift increasing over operating time may result in exceeding a limit a cceptable to the specific application, thereby establishing a functional lifetime. at the maximum permissi ble film temperature of 175 c the useful lifetime is specified for 1000 h. the des igner may estimate the performance of the particul ar resistor application or set certain load and temperature limits in order to main tain a desired stability. maximum resistance change at rated power description mma 0204 ht metric size rc 3715m operation mode standard power high temperature rated power p 70 = 0.25 w p 70 = 0.4 w p 70 = 0.5 w permissible film temperature, ? f max. 125 c 155 c 175 c operating temperature range - 55 c to 125 c - 55 c to 155 c - 55 c to 175 c max. resistance change at p 70 for resistance range: 47 ? to 100 k ? ? r / r max., after: 1000 h ? 0.10 % ? 0.15 % ? 0.25 % 8000 h ? 0.15 % ? 0.35 % - 225 000 h ? 1.0 % - -
document number: 28780 for technical questions, contact: melf@vishay.com www.vishay.com revision: 20-feb-12 97 mma 0204 ht - professional professional high temperature mini-melf resistor vishay beyschlag this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? products can be ordered using either the part number or the product description. notes ? resistance ranges printed in bold are preferred tcr/tolerance combinations. ? resistance values to be selected for 1 % tolerance fr om e24 and e96 and for 0.5 % tolerance from e24 and e192. part number and product description part number: mma0204td5620db300 part number: mma0204tz0000zb300 type/size version tcr resistance tolerance pac k ag i n g mma0204 t = ht d = 25 ppm/k c = 50 ppm/k z = jumper 3 digit value 1 digit multiplier multiplier 9 = *10 -1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 4 = *10 4 5 = *10 5 0000 = jumper d = 0.5 % f = 1 % z = jumper b3 b0 product description: mma 0204 - 25 0.5 % ht bl 562r product description: mma 0204 ht bl 0r0 mma 0204 - 25 0.5 % ht bl 562r mma 0204 - - ht bl 0r0 type size tcr tolerance version packaging resistance mma 0204 25 ppm/k 50 ppm/k 0.5 % 1 % ht = high temperature bl b0 562r = 562 ? 0r0 = jumper packaging model code quantity carrier tape width pitch reel diameter mma 0204 ht b3 = bl 3000 antistatic blister tape acc. 60286-3 type ii 8 mm 4 mm 180 mm/7" b0 10 000 330 mm/13" temperature coefficient and resistance range description resistance tcr tolerance mma 0204 ht 50 ppm/k 1 % 47 ? to 100 k ? 0.5 % 47 ? to 100 k ? 25 ppm/k 1 % 47 ? to 100 k ? 0.5 % 47 ? to 100 k ? jumper ? 10 m ? , i max. = 3 a m m a 0 2 0 4 t d 5 6 2 0 d b 3 0 0 m m a 0 2 0 4 t z 0 0 0 0 z b 3 0 0
www.vishay.com for technical questions, contact: melf@vishay.com document number: 28780 98 revision: 20-feb-12 mma 0204 ht - professional vishay beyschlag professional high temperature mini-melf resistor this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions note ? color code marking is applied according to iec 60062 (3) in four bands (e24 series) or five bands (e 96 or e192 series). each color band appears as a single solid line, voids are permissible if at least 2 / 3 of the band is visible from each radial angle of view. the last color band for tolerance is approximately 50 % wider than the other bands . an interrupted yellow band between the 4 th and 5 th full band indicates tc25. pattern styles for melf resistors note ? the given solder pad dimensions reflect the considerations for board design and assemb ly as outlined e.g. in standards iec 611 88-5-x, or in publication ipc 7351. they do not guarant ee any supposed thermal properti es, however, they will be found adequate for most gene ral applications. dimensions and mass type l (mm) d (mm) l 1 min. (mm) d 1 (mm) k (mm) mass (mg) mma 0204 ht 3.6 + 0/- 0.2 1.4 + 0/- 0.1 1.8 d + 0/- 0.15 0.8 0.1 22 recommended solder pad dimensions type wave soldering reflow soldering g (mm) y (mm) x (mm) z (mm) g (mm) y (mm) x (mm) z (mm) mma 0204 ht 1.5 1.5 1.8 4.5 1.7 1.2 1.6 4.1 l 1 k d 1 d l g x y z
document number: 28780 for technical questions, contact: melf@vishay.com www.vishay.com revision: 20-feb-12 99 mma 0204 ht - professional professional high temperature mini-melf resistor vishay beyschlag this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 description production is strictly controlled and follows an extensive set of instructions established for reproducibility. a homogeneous film of metal al loy is deposited on a high grade ceramic body (al 2 o 3 ) and conditioned to achieve the desired temperature coefficient. nickel plated steel termination caps are firmly pressed on the metallised rods. a special laser is used to achieve the target va lue by smoothly cutting a helical groove in the resistive layer without damaging the ceramics. the resistor elements are cove red by a protective coating designed for electrical, mechanical and climatic protection. the terminations receive a final pure tin on nickel plating. four or five colour code rings designate the resistance value and tolerance in accordance with iec 60062 (3) . the result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. this includes pulse load screening (for r ? 10 ? ) and additional non-linearity screening (for r ? 30 ? ) for the elimination of products with a potential risk of early life failures according to en 140401-803, 2.1.2.2. only accepted products are laid directly into the blister tape in accordance with iec 60286-3, type ii (3) or bulk case in accordance with iec 60286-6 (3) . assembly the resistors are suitable for processing on automatic smd assembly systems. they are su itable for automa tic soldering using wave, reflow or vapour phase as shown in iec 61760-1 (3) . solderability is specified for 2 years after production or requalification, however, excellent solderability is proven after extended storage in excess of 10 years. the permitted storage time is 20 years. the resistors are completely l ead (pb)-free, the pure tin plating provides compatibility with lead (pb)-free soldering processes. the immunity of the plating against tin whisker growth has been proven under extensive testing. the encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. the suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. all products comply with the gadsl (1) and the cefic-eeca-eicta (2) list of legal restrictions on hazardous substances. this includes full compliance with the following directives: ? 2000/53/ec end of vehicle life directive (elv) and annex ii (elv ii) ? 2011/65/eu restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) solderability is specified for 2 years after production or requalification. the permitt ed storage time is 20 years. approvals the resistors are approved wit hin the iecq-cecc quality assessment system for electronic components to the detail specification en 140401-803 which refers to en 60115-1 , en 140400 and the variety of environmental test procedures of the iec 60068 (3) series. conformity is attested by the use of the cecc logo ( ) as the mark of conformity on the package label. vishay beyschlag has achieved ?approval of manufacture? in accordance with iec qc 001002-3, clause 2 . the release certificate for ?technology approval schedule? in accordance with cecc 240001 based on iec qc 001002-3, clause 6 is granted for the vishay beyschlag manufacturing process. the resistors are qualified according to aec-q200. related products a wider range of tcr, tolerance and resistance values, plus the option of values from a diff erent e series is available with products approved to en 140401-803 , version a, without established reliability, nominal failure rate level e0 (quality factor ? q = 3). see the datasheets: ? ?professional melf resistors? ( www.vishay.com/doc?28713 ) ? ?precision melf resistors? ( www.vishay.com/doc?28714 ) ? ?high precision melf resistor? ( www.vishay.com/doc?28715 ) for products with superior pulse load capability, see the datasheets: ? ?high pulse load carbon film mini-melf resistor? ( www.vishay.com/doc?28717 ) ? ?high pulse load carbon film melf resistor? ( www.vishay.com/doc?28755 ) notes (1) global automotive declar able substance list, see www.gadsl.org . (2) cefic (european chemical industry counci l), eeca (european electronic component manufac turers association) , eicta (european tra de organisation representing the information and communica tions technology and consum er electronics), see www.eicta.org/index.php?id=995 ? issues ? environment policy ? chemicals ? chemicals for electronics. (3) the quoted iec standards are also released as en st andards with the same number and identical contents.
www.vishay.com for technical questions, contact: melf@vishay.com document number: 28780 100 revision: 20-feb-12 mma 0204 ht - professional vishay beyschlag professional high temperature mini-melf resistor this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 functional performance 0 - 55 0.5 power dissipation t amb high temperat u re standard po w er deratin g for operation modes - 25 50 70 100 125 150 0.4 0.3 0.2 0.1 0.6 c w 175 025 100 s 1 ms 10 ms 1 1 s 10 s 0.1 w 10 s 100 ms 100 10 pulse load p max. sin g le pulse maxim u m p u lse load, single p u lse; applica b le if 0 and n 1000 and max. ; for permissi b le resistance change e qu i v alent to 8 000 h operation pulse duration i t p u u 100 s 1 ms 10 ms 1 1 s 10 s 0.1 w 10 s 100 ms 10 100 continuous pulse maxim u m p u lse load, contin u o u s p u lses; applica b le if ( ? am b ) and max. ; for permissi b le resistance change e qu i v alent to 8 000 h operation continuous pulse load p max. p u p u pulse duration i t
document number: 28780 for technical questions, contact: melf@vishay.com www.vishay.com revision: 20-feb-12 101 mma 0204 ht - professional professional high temperature mini-melf resistor vishay beyschlag this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 100 s 1 ms 10 ms 1 s 10 s 10 s 100 ms 100 v pulse volta g e maxim u m p u lse v oltage, single and contin u o u s p u lses; applica b le if p p max. ; for permissi b le resistance change e qu i v alent to 8 000 h operation max. pulse duration i t pulse volta g e u 1000 v 100 v 1 k v 10 v 10 k v 100 1 k 10 k 100 k 1 m 10 10 m r resistance value 1.2/50 pulse p u lse load rating in accordance w ith iec 60115-1, 4.27; 1.2 s/50 s; 5 p u lses at 12 s inter v als; for permissi b le resistance change 0.5 % pulse volta g e u 100 1 k 10 k 100 v 100 k 1 m 1 k v 10 v 10 k v 10 10 m 10/700 pulse p u lse load rating in accordance w ith iec 60115-1, 4.27; 10 s/700 s; 10 p u lses at 1 min inter v als; for permissi b le resistance change 0.5 % pulse volta g e r resistance value u
www.vishay.com for technical questions, contact: melf@vishay.com document number: 28780 102 revision: 20-feb-12 mma 0204 ht - professional vishay beyschlag professional high temperature mini-melf resistor this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 test and requirements all tests are carried out in accordance with the following specifications: en 60115-1, generic specification en 140400, sectional specification en 140401-803, detail specification the resistors are approved wi thin the iecq-cecc quality assessment system for electronic components. for the full test schedule refer to the documents listed above. the testing also covers most of the requirements specified by eia/is-703 and jis-c-5202. the tests are carried out under standard atmospheric conditions in accordance with iec 60068-1, 5.3 (3) . climatic category lct/uct/56 (rated temperature range: lower category temperature, upper category temperature; damp heat, steady state, test du ration 56 days) is valid. unless otherwise specified the following values apply: temperature: 15 c to 35 c relative humidity: 45 % to 75 % air pressure: 86 kpa to 106 kpa (860 mbar to 1060 mbar). the components are mounted for testing on printed-circuit boards in accordance with en 140400, 2.3.3, unless otherwise specified. the requirements stated in the test procedures and requirements table are based on the required tests and permitted limits of en 140401-803. however, some additional tests and a number of improvements against those minimum requirements have been included. the stated requirements for long-term tests are typically fulfilled with a statistical safety of at least + 5 s. current noise a 1 0.01 100 0.1 1 v / v current noise - a 1 in accordance w ith iec 60195 1 k 10 k 100 k 1 m 10 m r resistance value 0.1 0.3 1 ghz 3 0.5 1.0 1.5 1. 8 izi/r frequency rf - behaviour |z|/r for 49.9 melf resistors f x
document number: 28780 for technical questions, contact: melf@vishay.com www.vishay.com revision: 20-feb-12 103 mma 0204 ht - professional professional high temperature mini-melf resistor vishay beyschlag this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 test procedures and requirements en 60115-1 clause iec 60068-2 test method test procedure requirements permissible change ( ? r ) stability class 0.25 or better stability for product types: mma 0204 ht 47 ? to 100 k ? 4.5 - resistance - 1 % r ; 0.5 % r 4.8.4.2 - temperature coefficient at (20/- 55/20) c and (20/155/20) c 50 ppm/k; 25 ppm/k 4.25.1 - endurance at 70 c: standard operation mode u = ? u max. ; 1.5 h on; 0.5 h off; 70 c; 1000 h (0.10 % r + 10 m ? ) 70 c; 8000 h (0.15 % r +10 m ? ) endurance at 70 c: power operation mode u = ? u max. ; 1.5 h on; 0.5 h off; 70 c; 1000 h (0.15 % r +10 m ? ) 70 c; 8000 h (0.35 % r +10 m ? ) endurance at 70 c: high temperature mode u = ? u max. ; 1.5 h on; 0.5 h off; 70 c; 1000 h (0.25 % r +10 m ? ) 4.25.3 - endurance at upper category temperature 125 c; 1000 h (0.05 % r +5 m ? ) 155 c; 1000 h (0.15 % r +5 m ? ) 175 c; 1000 h (0.25 % r +5 m ? ) 4.24 78 (cab) damp heat, steady state (standard mode) (40 2) c; 56 days; u = 0.3 x u rated ; (93 3) % rh (0.15 % r +10 m ? ) 4.39 67 (cy) damp heat, steady state, accelerated (standard mode) (85 2) c; (85 5) % rh; u = 0.3 x u rated ; 1000 h (0.25 % r +10 m ? ) 4.23 climatic sequence: (0.15 % r +10 m ? ) 4.23.2 2 (bb) dry heat uct; 16 h 4.23.3 30 (db) damp heat, cyclic 55 c; 24 h; ? 90 % rh; 1 cycle 4.23.4 1 (ab) cold lct; 2 h 4.23.5 13 (m) low air pressure 8.5kpa; 2h; (25 10) c 4.23.6 30 (db) damp heat, cyclic 55 c; 24 h; ? 90 % rh; 5 cycles 4.23.7 - dc load u = ? u max. ; 1 min (high temperature mode) lct = - 55 c; uct = 155 c - 1 (ab) cold - 55 c; 2 h (0.05 % r +5 m ? ) 4.19 14 (na) rapid change of temperature 30 min at lct; 30 min at uct; lct = - 55 c; uct = 125 c 5 cycles (0.05 % r +10 m ? ) 1000 cycles (0.15 % r +10 m ? ) lct = - 55 c; uct = 155 c 1000 cycles (0.25 % r +10 m ? ) 4.13 - short time overload: standard operation mode u = 2.5 x ? 2 x u max. ; 5 s (0.03 % r +5 m ? ) p 70 x r p 70 x r p 70 x r p 70 x r p 70 x r
www.vishay.com for technical questions, contact: melf@vishay.com document number: 28780 104 revision: 20-feb-12 mma 0204 ht - professional vishay beyschlag professional high temperature mini-melf resistor this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? the quoted iec standards are also released as en st andards with the same number and identical contents. 4.27 - single pulse high voltage overload; standard operation mode severity no. 4: u = 10 x ? 2x u max. ; 10 pulses 10 s/700 s (0.25 % r +5 m ? ) 4.37 - periodic electric overload; standard operation mode u = ? 2 x u max. ; 0.1 s on; 2.5 s off; 1000 cycles (0.5 % r +5 m ? ) 4.22 6 (fc) vibration endurance by sweeping; 10 hz to 2000 hz; no resonance; amplitude ? 1.5 mm or ? 200 m/s 2 ; 7.5 h (0.05 % r +5 m ? ) 4.40 - electrostatic discharge (human body model) iec 61340-3-1*; 3 pos. + 3 neg. discharges mma 0204: 2 kv (0.5 % r + 50 m ? ) 4.17.2 58 (td) solderability solder bath method; snpb40; non-activated flux; (215 3) c; (2 0.3) s good tinning ( ? 95 % covered); no visible damage solder bath method; snag3cu0.5 or snag3.5; non-activated flux; (235 3) c; (2 0.3) s good tinning ( ? 95 % covered); no visible damage 4.18.2 58 (td) resistance to soldering heat solder bath method; (260 5) c; (10 1) s (0.05 % r + 10 m ? ) reflow method 2 (ir/forced gas convection); (260 5) c; (40 1) s (3 times) (0.03 % r + 10 m ? ) 4.29 45 (xa) component solvent resistance isopropyl alcohol; 50 c; method 2 no visible damage 4.30 45 (xa) solvent resistance of marking isopropyl alcohol; 50 c; method 1, toothbrush marking legible; no visible damage 4.32 21 (ue 3 ) shear 45 n no visible damage 4.33 21 (ue 1 ) substrate bending depth 2 mm, 3 times no visible damage, no open circuit in bent position (0.05 % r + 5 m ? ) 4.7 - voltage proof u rms = u ins ; 60 s no flashover or breakdown 4.35 - flammability iec 60 695-11-5, needle flame test; 10 s no burning after 30 s test procedures and requirements en 60115-1 clause iec 60068-2 test method test procedure requirements permissible change ( ? r ) stability class 0.25 or better stability for product types: mma 0204 ht 47 ? to 100 k ? p 70 x r 15 x p 70 x r
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of MMA02040D1603DB300

	To Download MMA02040D1603DB300 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .